Filter
Top Products
4. Extra possibilities
Programming Macros
A macro allows you to automate actions you have to do frequently with your
remote control. E.g. if you want to watch a DVD, you have to turn on the
DVD, turn on the TV, turn on the receiver/amplifier, select the DVD input
channel on your amplifier and start playing the DVD.The different keys you
have to press to do this, can be stored under one single key. So you only
have to press one button to start up your system for watching a DVD.
Example ‘Watching DVD’ macro:
1 Select the required mode with the
SELECT key, e.g. DVD mode.
2 Press keys 1 and 6 of the RU760
simultaneously for 5 seconds until the
DVD label blinks twice and then remains lit.
3 Press keys 9, 9 and 1, in that order.
4 Press the key under which you want to
store the macro, e.g. the P
(
Pkey.
Notes:
– Once a macro is stored under a key, the original
function of the key can not be used anymore.
–You can also store the macro by pressing Shift
in combination with a target key (the target key keeps its original function).
–You cannot store a macro under the SELECT, LEARN or SHIFT key.
5 Enter the sequence of keys to be stored, e.g.:
• Select DVD mode with SELECT key and press the Standby key.
• Select TV mode with SELECT key and press 1.
• Select AMP mode with SELECT key and press the Standby key.
• Select DVD mode with SELECT key and press 1.
6 To close the macro press the LEARN key.
– The DVD label blinks twice to confirm.
• If you now select DVD mode and press
the P
(
Pkey, the remote will switch on the
DVD, the TV and the AMP and starts playing
the disc.
VCRDVDSAT AMPCD
LEARN SELECT GUIDE
TITLE AUDIO CHAPTER SUBTITLE
DISC SYST.MENU
MENU BACK
AV
OK
P P
AUX
TUNER
CD
123
456
789
SHIFT
0
TV
VCR
SOURCE
DVD
AUX
TUNER
CD
123
456
789
SHIFT
0
VCRDVDSAT AMPCD
LEARN SELECT GUIDE
TITLE AUDIO CHAPTER SUBTITLE
8
Instructions for use
English
RU760.qxd 04-06-2004 16:59 Pagina 8