Mitsubishi Electronics CS-35207 CRT Television User Manual


 
TV+VCR+cable with a cable box (cont.)
_>Important:
_>Important:
_>Important:
procedure
(See illustration on the following page.)
O Connect the incoming cable to the IN terminal on the cable
box.
O Connect a coaxial came to the OU_2 terminal on the back of the
cable box; connect the other end of this cable to the ANTENNA-
IN terminal on the back of the VCR.
Connect the second coaxial cable to the ANTENNA-OUT termi-
nal on the back of the VCR. Connect the other end of this cable
to the antenna terminal on the back of the TV.
O Connect an RCA pin.-type video cable to the VIDF, O OUT termi-
nal on the back of the VCR. Connect the other end of this cable
to the VIDEO INPUT terminal on tb e back of the television.
If you are connecting a Super VHS (S-VHS) VCR, use a Super
Video cable instead of an RCA pin-type video cable. Connect a
Super Video cable to the S-VIDEO OUT terminal on the VCR.
Connect the other end of this cable to the S-VIDEO IINPUT termi-
hal on the back of the television.
O Connect a set of RCA pin-type audio cables to the AUDIO OUT
terminals on the back of the VCR. Use the red cable to connect
the right (R) channel and the white cable for connecting the left
(L) channel.
Connect the other ends of this came to the AUDIO INPUT
terminals on the back of the television.
If your VCR is monaural (non-stereo), you will only connect a single
RCA pin-type audio cable. Connect the cable to the VCR, then
connect the other end to the L (LEFT) audio input on the back of
the television.
If your VCR has the video channel swit,:h, set to "OFF/AV" mode.
See your VCR's owner's gmide for details.
O Set the VCR to the playback mode.
O To view the VCR, select the external input source by using the
INPUT button on the control panel or remote control.
32 Chapter 2: Connecting Your TV