Mitsubishi Electronics CS-35207 CRT Television User Manual


 
Changing channels
_Important:
_Important:
_Important:
Your TV offers you four ways of changing channels once their
numbers have been programmed into channel memory:
selecting channels one-by-one with the channel controls,
directly accessing a channel by pressing the number buttons,
using the QuickView option to recall the last channel,
using the special QuickView opticn to switch to a particular
memorized channel, and
using the SuperQuickView function to alternate between
channels on a user.-chosen list.
To change channels faster, use either of the following procedures:
Enter three digits for every channel number, using zeros where
needed. For example, enter 004 tc view channel 4 and 028 to
view channel 28 or,
Press the ENTER button after ,;electing the number of the
channel. For example, press 4 and ENTER to view
channel 4.
Cable channel numbers 0 and greate:r than 126 are not used.
TV stations 0, 1, and 7'0 through 999 are not used If you select one
of these channel numbers, your TV _ill not change channels.
If you memorized channels using the Indoor/Outdoor Antenna, your'
TV can receive antenna channels 2-13 (VHF) and 14-69 (UHF). If
you memorized channels using the C able Antenna, your TV can
receive cable channels 1-125. If you ,_elect a channel outside of the
memorized range, your TV will not change channels.
46 Chapter 3: Operating Your TV