Filter
Top Products
16 Display Module (FX3S-5DM)
165
FX3S Series Programmable Controllers
User's Manual - Hardware Edition
11
Built-in Analog
12
Output Wiring
13
Wiring for
Various Uses
14
Test Run,
Maintenance,
Troubleshooting
15
Other Extension
Units and
Options
16
Display Module
(FX
3S
-5DM)
17
Memory
Cassette
A
Special Devices
(M8000-, D8000-)
B
Instruction List
C
Discontinued
models
16.5 Monitor/Test
Example when data register (D) 32-bit is monitored
Press the [+] button to increase the device number by "2". Press the [-] button to decrease the device number
by "1".
Press and hold the [+] or [-] button for 1 second or more to increase or decrease the value at high speed.
In the case of the list shown below, the screen display is as follows.
3. Test mode operation
1) Press the [OK] button in the monitor mode to change the current value.
The current value blinks while it is being changed.
2) Use the [+] / [-] buttons to change the value as desired.
Press and hold the [+] or [-] button for 1 second or more to increase or
decrease the value at high speed.
3) Press the [OK] button to determine the input. At this time, the input
data is written to the PLC.
Device Current value
D0 (D1) 1000000
D2 (D3) 1500000
D4 (D5) 2000000
[+][+]
[-]
[+]
[-]
[-]
[-]
Changing the current value