Filter
Top Products
46
46
Antenna
(Figure 1)
Select Ant-A, Ant-B, or Ant-DTV. For each
antenna, you can memorize, add or delete
channels in memory and add channels to
the SQV (Super Quick View™) list. For
Ant-A and Ant-B, you can name channels.
Channel
(Figure 1)
Select the channel you want to add or delete
from memory, name, or add to the SQV
Super Quick View™ list.
Use ADJUST or to select the channel
for editing or use CHANNEL button for only
those channels already in memory.
Memory
(Figure 1)
After the available channels have been mem-
orized with Memorize Channels, weaker
channels viewed with Ant-A or Ant-B can be
added. Unwanted channels for Ant-A, Ant-B,
or Ant-DTV can also be deleted.
Use the CHANNEL button on the remote
control to see the channels in memory.
Use Adjust or to select Added or
Deleted for the channel shown in the “Chan-
nel” option box.
Name
(Figure 1)
Channels shown on Ant-A or Ant-B can be
named (up to four characters). After you
enter a name, it will appear on the TV
screen, next to the channel number.
Use Adjust or to select each letter
then press ENTER to move to the next letter
position. Press CANCEL to move back one
position. Pressing CANCEL while in the rst
position will cancel the entire name. The
possible letters/characters are A-Z, 0-9, and
the following characters: ! . & ‘ / : * - and
blank.
Antenna Menu: Antenna, Memorize Channels, Channel,
Memory, and Name
Part III: Setup
Antenna, Memorize Channels, Channel, Memory, Name
Memorize Channels
(Figure 1)
First select either air or cable (if direct cable
to TV is used), then press ENTER. This
selection will allow you to memorize the
channels your TV can receive in your
area. You can stop memorization at any
time by pressing CANCEL. Channels mem-
orized prior to pressing CANCEL will stay
in memory. After channels are memorized,
you may select memorized channels in
ascending or descending order by pressing
the CHANNEL button on the remote control.
If memorizing Cable for Ant-DTV a pop up
selection for the cable type of Standard,
HRC or IRC is displayed. Use ADJUST
or to select the type, then press ENTER
to begin memorization. If you do not know
the type for your cable, contact your cable
company.
Figure 1. Antenna menu