Mitsubishi Electronics WS-65909 Projection Television User Manual


 
63
63
Part IV: Operation
Operation of PIP and POP
Remote Control Functions: Operation of PIP and POP
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP
picture source device. A menu similar to the
Device Selection Menu will be displayed.
Changing PIP/Side-by-Side Chan-
nels
Press PIP CH to scroll up and down through
memorized channels on Ant-A and Ant-B.
Exchanging Program Images
Press ENTER/EXCH to exchange the main pic-
ture and the PIP/POP picture.
Moving PIP Image
If no menus are on the screen, press ADJUST
, , , or to move the PIP display anywhere
on the main screen.
Automatic POP Switching
When automatic POP switching is active, the TV
will cycle through memorized channels or strobe
pictures from other A/V components in the POP
display.
Selecting POP “Live” Image
Press ADJUST , , , or then press ENTER
to select a different POP “live” image (automatic
POP switching must be paused).
Freeze the PIP and Side-By-Side
Picture, Pause POP Switching
Press PAUSE to freeze the PIP and side-by-side
images or pause POP switching. Press PAUSE
again to return to a “live” image or restart POP
switching.
PIP/POP Audio Signal
For PIP/POP audio connection illustration, see
Back Panel Functions -
2
, page 13. Volume
for the PIP AUDIO OUTPUT is controlled by the
ampli er or wirel ess headphones.
MAIN
PICTURE
Side-by-Side
MAIN
PICTURE
POP 1 POP 2 POP 3
POP 4 POP 5 POP 6
POP 7 POP 8 POP 9
PIP A 017
Ant-A 002 KCBS
Standard
Stereo SAP
TV-PG DLSV
SQV1
MAIN
PICTURE
POP 1
POP 2
POP 3
PIP/POP Combinations
*Same channel for Ant-A and Ant-B or same input for other inputs not available for side-by-side.
**480p and 1080i signals are not compatible with PIP/POP.