Filter
Top Products
31
Program skip using the POWER button
If you have entered only one program into your VCR’s memory,
you can skip the program without going into the VCR’s menus.
Simply press POWER on the front panel once. The programmed
recording light will turn off, and the program will be skipped. If you
decide not to skip the program, press POWER on the front panel
twice, the programmed recording light will light up again.
Changing timer recording settings
1 Press MENU on the remote control. Your VCR will turn on
and VCR Main Menu will appear. Press the ADJUST
buttons to select Program to record. Press ENTER.
2 Recap screen will display for 4 seconds. While this screen
is displayed, press the ADJUST buttons to place the cursor
arrow next to the program you wish to change. Press
ENTER. You will see the Program to record setting menu.
3 Press ENTER repeatedly to select the item you wish to
change. Use the ADJUST buttons to change it. Then press
ENTER repeatedly to return the altered program to the
Recap screen.
4 Press MENU twice to exit the menus. Then press POWER
to turn off the VCR. Make sure the programmed recording
light is on.
Canceling a timer recording before the recording starts
1 Press MENU on the remote control. Your VCR will turn on
and VCR Main Menu will appear on your screen. Use the
ADJUST buttons on the remote control to select Program to
record. Press ENTER.
2 Recap screen will display for 4 seconds. While this screen
is displayed, press the ADJUST buttons to place the cursor
next to the program you wish to cancel.
3 Press CANCEL. The program is erased.
4 Press MENU twice to exit the menus.
TIMER RESET
You can use TIMER RESET on the rear panel to erase both the
clock and all timer recordings.
To use TIMER RESET, press it with a pencil or a ball point pen.
The power will turn off and the clock will be cleared. All timer
recordings are erased.
If you have set the Clock set setting of the Set the clock menu to
AUTO, the auto clock function will automatically set the clock
again.
Additionally, TIMER RESET will reset the on-screen language you
selected. The next time you set the menus, you will have to select
the on-screen language.
¬Program to record
CH DAY ON OFF
§ 2 MO11 11:30am 1:30pm SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
Timer Recording
¬Program to record
ƒChannel 2
ƒDay Monday 11
ƒStart time 11:30am
ƒStop time 1:30pm
ƒRecord speed EP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
CH DAY ON OFF
§ 2 MO11 11:30am 1:30pm SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
VCR Rear Panel
TIMER
RESET
TIMER
RESET