Mitsubishi Electronics LT-3040 Flat Panel Television User Manual


 
52
AUDIO/VIDEO Setting Descriptions: Video
Video Settings
NOTE: A slider will display on-screen for each
setting. The slider has a numeric value, where 63
is the maximum, the mid-range is 31 and the
minimum setting is 0.
Contrast
Provides a slider to adjust the white-to-black
level. Low contrast shows a variety of shades
in darker images, while high contrast shows
darker images more uniformly black and
makes colors appear more vibrant.
Brightness
Provides a slider to adjust the overall
brightness of the picture.
Sharpness
Provides a slider to adjust the detail and clarity.
Color
Provides a slider to adjust the color intensity.
Tint
Provides a slider to adjust the proportion of red
to green.
Color Temp (Color Temperature)
Allows you to adjust how white images are
displayed. Your choices are:
• Low: White images will have a warm cast to
them. This adjustment is an average and can
vary due to ambient room lighting, video scene
brightness and the TV’s age.
• Medium: White images will be balanced
between the Low (warm) and High (cool)
settings.
• High: White images will have a cool cast to
them. This setting may provide the most
realistic picture under bright lighting.
Video Noise
Reduces minor noise (graininess) in the
broadcast or input signal.
This function operates only in 480i mode.
Film Mode (Auto)
Video media uses a video camera created at 30 frames
per second. Film media uses a film camera created
at 24 frames per second. Examples of video media
are live TV broadcast such as news, special events, or
video taped programs. Examples of film media are
motion pictures, made-for-TV movies, and many
prime time programs. Filmed media is converted by
the broadcaster or home video company to 30 frames
per second to match TV or video standards. This
conversion can leave subtle “picture artifacts” or
conversion errors.
The settings are On and Off. If you select On, the
system automatically detects if the signal source is Film
and corrects for conversion errors. If you select Off,
the system will never correct for conversion errors.
This function operates only in 480i mode.
Back Light
Provides a slider to adjust the TV’s illumination. A lower
setting preserves the life of the backlight lamps.
PC Setting Reset
Resets PC settings to factory default.
H Position
Provides a slider to center image by moving it to
the left or right (available for PC and MonitorLink
inputs only).
V Position
Provides a slider to center image by moving it up or
down (available for PC and MonitorLink inputs only).
PC Video Clock
Provides a slider to adjust PC clock frequency.
PC Fine Detail
Provides a slider to adjust PC image flicker (clock
phase).
PC H Resolution
Provides a slider to adjust PC horizontal size by
increasing or decreasing the setting.
PC V Resolution
Provides a slider to adjust PC vertical size by increasing
or decreasing the setting.
NOTE: For optimal picture performance, it is
recommended that you adjust your video settings
(specifically contrast and brightness) during initial
setup. Certain factors will affect your personal
preferences, including room lighting, glare reflections
and viewing angles/distance.