Mitsubishi Electronics WD-52527 Projection Television User Manual


 
45
Chapter 3. NetCommand Setup and Editing
Edit NetCommand
®
, Add an A/V Receiver, continued
Audio Output to AVR Screen
Figure 12
Use this screen to select which A/V Receiver input is
connected to AUDIO OUTPUT on the TV back panel.
Press ADJUST to select Next> and move to the Finish
screen.
Finish Screen
Figure 13
To finalize your selections and complete the A/V
receiver setup, select Finish from the Finish screen.
Note: If you connected the audio output of other
devices directly to the A/V Receiver, you must use
the “Change” function of the Edit NetCommand
menu and select each device to assign the correct
A/V Receiver input to be used with each device.
Name Screen
Figure 11
The Name screen allows you to change the default name
for the A/V receiver to a custom name of up to eight
characters (including a blank space), selecting from
letters, numbers, and nine different characters. Using
the TV’s remote, press ADJUST or to select each
letter, then press ENTER to move to the next position.
Press CANCEL to delete the current letter and move back
one character position. When in the first position, the
CANCEL button will return the name to the default name.
Figure 11. Name screen
Figure 12. Audio Out to AVR screen
Figure 13. Finish screen
IMPORTANT
NetCommand does not allow you to delete
an A/V receiver or change the connections
for a device (such as the TV or a DVD
player) if the A/V receiver is currently being
used. To delete or change the A/V receiver
connections, you must be listening to the
TV speakers.