Mitsubishi Electronics WT-42315 Projection Television User Manual


 
42
43
CHANNEL EDIT Menu: Memory, Name Selection
Name
(Figure 26)
Name channels shown on Ant-A or Ant-B (up to
four characters). After you enter a name, it will
appear on the TV screen next to the channel
number.
1. Select Ant-A or Ant-B.
2. Select the memorized channel you want to
name.
3. Press ADJUST until you see the underline
highlighted in the Name field.
4. Use ADJUST or to select letters A-Z,
numbers 0-9, and/or symbols (!.&’/:*- and
blank) for each character of the name you
would like for the selected channel. Press
ENTER after choosing each letter and after the
name is complete. If you want to change your
selection while on the option field, use CANCEL
to delete the current character. You will move
one position back. If you press CANCEL while
at the first character, the entire name will be
deleted.
Memory
(Figure 25)
Add weaker channels viewed with Ant-A or Ant-B
and delete unwanted channels, after all available
channels have been memorized with Memorize
Channels (page 35). Use the CHANNEL button on
the remote control to view memorized channels.
  
  
 
 
 
 

  
  
  
  
 
  
  
 
 
 
 
  
  
  
  
 
Figure 25. Memory
Figure 26. Name
CHANNEL EDIT Menu: Memory, Name Selection