Filter
Top Products
14 2. TV Menus
For assistance call 1(800) 332-2119
S ound
Sound Au dio
Settings in this menu are saved for the current input only with the exception of Balance,
which applies to all inputs. Press to make changes and then press
MENU
to return to the
menu screen.
To make Audio adjustments while watching TV and without using the menu:
1. Press the
AUDIO
key.
2. Press to select an audio option.
3. Press to change the setting.
TV Speakers On Turns on the internal TV speakers.
Off
Turns off the internal TV speakers so you hear sound only from a connected A/V receiver.
Note: When you disconnect an A/V receiver, be sure to change the Sound setting
to TV to hear sound from the TV speakers.
Bass Controls volume of low-pitched sound from the TV speakers.
Treble Controls volume of high-pitched sound from the TV speakers.
Balance Controls audio balance between the right and left TV speakers
Sou nd Mode Stereo No special audio effects from the TV speakers
Surround Modifies audio from the TV speakers.
• For monaural (non-stereo) programs, creates a simulated stereo effect.
• For stereo programs, creates a simulated surround sound effect.
Level Sound On, Off Reduces differences in sound volume between programming segments, such as the
difference between regular broadcast programs and commercial segments.
Li sten To
(applies only
to analog
channels from
the
ANT
input)
Mono Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono.
Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word
Stereo is displayed when you tune to a channel broadcasting in stereo.
SAP
(Second Audio
Program)
Selects an additional monaural sound track not audible during normal TV viewing.
The SAP signal might be related to the program (such as a sound track in a foreign
language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters SAP are displayed when you tune to the channel.