Mitsubishi Electronics XL2 Projection Television User Manual


 
EN – 7
ENGLISH
Bottom side
2
1
1 Lamp cover
2 Adjustment foot
Caution:
Do not replace the lamp right after using the projector. The
lamp is very hot.
COMPUTER
VIDEO
KEYSTONE
EXPAND
VOLUME
LASER
P in P
AUTO POSITION
+
1
2
3
4
5
6
7
8
9
10
11
20
19
18
21
17
16
15
14
13
12
12
MENU
ENTER
MUTE
STILL
16 : 9
R-CLICK
Remote control
1 Laser aperture
2 Transmission window
3 Indicator
4 POWER button
5 KEYSTONE button
6 EXPAND button
7 + , – (VOLUME) buttons
8 Mouse pointer
9 MENU button
10 STILL button
11 MUTE button (Audio/Video)
12 16 : 9 button
13 ENTER button
14 R-CLICK button (For mouse)
15 Direction buttons
16 LASER button
17 AUTO POSITION button
18 PinP button
19 VIDEO 1, 2 buttons
20 COMPUTER button
21 Left click button (For mouse)
The + and - buttons are used in the KEYSTONE
adjustment and the EXPAND mode in addition to the
volume control.
Pressing the LASER button emits a laser beam. Even
when you keep holding down the LASER button, it is
emitted only one minute. To keep emitting it longer,
press the LASER button again.
You can disable the LASER button to prevent
laser radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the }
button three times.
How to enable the LASER button
While holding the LASER button down, press the {
button three times.
When the batteries are changed, the LASER button will
be enabled.
About the laser beam
This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength
: 640-660 nm)
Beam Divergence : 6m distance about 10.0mm x 10.0mm (±6.0mm)
CAUTION :
Pressing the LASER button on the remote control emits a laser beam. Do not
look into the laser beam directly. Do not point the laser beam at anyone.
Looking at the laser beam directly may damage eyesight.
Use of controls or adjustments or procedures other than those specified herein may
result in hazardous radiation exposure.
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 640-660nm
MAX OUTPUT : 1mW
CLASS 2 LASER PRODUCT
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
CAUTION
CAUTION
Complies with 21 CFR. 1040. 10 AND 1040. 11
IEC 60825-1:1993+A1:1997