Filter
Top Products
20
ENG
SYSTEM OPERATIONS AND SET UP
FOR DEVICE BUTTONS:
1 Press one of the twelve device buttons you wish to store macro functions with the
cursor on DEVICE BUTTON.
2 Move the cursor to COMMON BUTTON and select again either the same or another
device button whose functional buttons you wish to store in the device macro button
you first selected. You can store up to 14 commands in the device macro buttons.
3 Store the commands you selected to the macro button by pressing CH (UP) button. To
cancel the macro commands press CH (DOWN).
FOR FAVORITE CHANNEL BUTTON:
1 Press the device you wish to program favorite channels with cursor on COMMON
BUTTON.
2 Press one of the favorite channel buttons and enter the channel number you wish to
store in the FAVORITE channel button. You can store up to 14 commands.
3 Store the commands you selected in the Favorite channel button by pressing Channel
UP button. To cancel the macro commands, press CH (DOWN).
Once you complete the macro programming and wish to exit, press both the MAIN and PAGE
buttons simultaneously. This will take you to the setting mode. Move the cursor to 8. TO EXIT
in setting mode and press the joystick down to exit or simply press the MAIN button to exit to
main menu.
NOTE
Pressing the Volume Up button during the macro programming will add a time delay of
0.5 seconds between the commands, e.g. pressing the Volume Up button twice will cause
a pause of 1 second between the commands where the delay was inserted.
TO ERASE MACRO FUNCTIONS
To erase the functions you stored in any of the macro buttons, press the Channel Up button
without entering any commands during the macro programming mode.