Filter
Top Products
OSD NAVIGATION
The L 54’s internal DVD player employs a simple, self-explanatory system of on-screen display “menus”
that will appear on the connected video monitor/TV. These are required during the setup process (and
are useful in day-to-day operation), so be sure to connect the monitor/TV before proceeding with setup.
DISPLAY THE SETUP MENU
Press “SETUP/MEMORY” button on the front panel to display the L 54’s “Setup Menu” screen on your
video monitor/TV. If the OSD does not appear, check your MONITOR OUT connections.
NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES
To navigate through the Setup Menu OSD options, please do the following using the HTR 4 (make sure
to set the HTR 4’s Device Selector to DVD):
1 Press keys to move up or down the menu selections.
2 Use keys to select through the options of a particular menu.
3 Press “ENTER” to save the settings.
To exit the Setup menu or from a menu option without saving, press the HTR 4’s “RTN” key or the front
panel’s SETUP/MEMORY button. You can also exit a menu option without saving by using the keys.
DISPLAY DISC OSD
You can display the general disc playback status on the TV screen. Some items can be changed using
the menu. To use the on-screen display:
1 Press DISPLAY during playback.
2 Press to select an item. The selected item is highlighted.
3 Press ENTER to change the setting. You can also use the number buttons if appropriate.
NOTES
• The display feature may not be available for all disc media and is media dependent.
• The front panel and HTR 4’s “DISP” button toggles between time/track/chapters and subtitle/
angles/audio conguration (DVD only).
• If no button is pressed for about 10 seconds, the on-screen display disappears.
SETUP MENU
The Setup Menu allows one to customize the operation of the L 54. If the factory defaults do not suit
your taste, you will need to use the setup menu to congure the L 54 yourself.
To access and navigate through the Setup Menu selections, please refer to and follow the directions
stated in the above section about “Navigating the Setup Menu OSD and Making Changes.”
TV ASPECT RATIO
Select ‘4:3 LB’ or ‘4:3 PS’ when a standard 4:3 TV is connected.
4:3 LB Displays a wide picture with bands on the upper and lower portions of the screen.
4:3 PS Automatically displays the wide picture on the entire screen and cuts o the portions that do
not t.
16:9 Select when a 16:9 wide TV is connected.
TV SYSTEM
The ‘AUTO’ setting will detect automatically the media being played and display it. The other two
settings, ‘NTSC’ and ‘PAL’, can be selected to force the output of the L 54 to the desired format. For
example one can load a PAL media and display it in the NTSC format. Similarly one can load an NTSC
media and display it in the PAL format.
Depending on the type of TV set you own, select the signal mode you wish to watch your disc. The
default or Auto setting is PAL for Europe and NTSC for North America.
NOTE
Only NTSC is available for North America models.
OPERATION
USING THE L 54’S INTERNAL DVD PLAYER SETUP MENU
ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO РУССКИЙ SVENSKA
16