Filter
Top Products
Chapter 2 Installation and Configuration
© National Instruments Corporation 2-9 HSE Linking Device and NI-FBUS Software
Note If you are importing device descriptions for multiple devices, you might see that they
can have the same filenames. Each file contains information about the device and its
manufacturer, and will be placed appropriately in the hierarchy under the base directory.
5. Click OK. A window opens that gives the full path to which the
.ffo
and
.sym files were copied.
6. Click DD Info. The DD Info dialog box opens as shown in Figure 2-5.
Figure 2-5. Import DD file
7. If the base directory field is blank, enter a base directory. The base
directory you enter here will be where NI-FBUS looks for all device
descriptions. Do not change the base directory after you have started
importing device descriptions; otherwise, NI-FBUS will not be able to
find the device descriptions you previously imported. Your device
description files will automatically be placed in the appropriate
manufacturer ID subdirectory under this base directory.