Support User Manuals

NCR NCR 5972 Home Theater Screen User Manual

Open as PDF

of 90

Chapter 4: Programming Set Up 4-7

Enable Cursor

Format: 1B 07

Description: Thiscommandcausesaflashingcursortobeused

whenevertheDisplayOnstateisinforce.Whenthecursoris

enabled,thecursorisvisibleandflashingatthecurrentcursor

position.Theflashingcursorshouldbevisiblefor1secondand

thenthecharacteratthe

cursorpositionshouldbevisiblefor1

second.Theeffectistoalternatebetweenthecharacterandthe

cursor.Thecursorisdefinedascharacter0X5Fofwhatever

charactersetiscurrentlychosen.Forthethreesupportedcharacter

sets,thecursoristhebottomrowofpixelsturnedon.For

auser‐

definedcharacterset,thecursoriswhateverisdefinedascharacter

0X5Fofthecharacterset.Whenthecursorisenabled,itoverwrites

thecharacteratthecursorposition.Ifthecursorisdisabled,the

characteratthecursorpositionisleftvisible.

Note: ThecursorontheLCD

blinksonandoffevery.5second.

Thecursordisplaysconcurrentlywithwhatevercharactermay

alreadybedisplayedatthecursorposition.

Disable Cursor

Format: 1B 08

Description: Thiscommandcausesthecursortobeturnedoff.

Thisisthedefaultstateforthecursorafterpower‐up.

previous next