Filter
Top Products
E-61
Copying All the Data (Entry Copy)
This function copies the registered signal data (i.e., the copy source) to the
selected number (i.e., the copy destination).
1. Displaying the Signal Registration Menu Display
Select [Memory] → [User Memory] or [Channel Memory] from the main
menu, then press the ENTER button.
The signal registration menu display will appear.
See "Selecting Memory Display" on Page E-57 for details.
2. Copying
Press the remote control ▲/▼ button and select [Entry Copy], then press the
ENTER button.
The display will change to the user memory or the channel memory display.
"Copy: Copy Source Selection" will appear at the bottom of the display.
1) Press the remote control ▲/▼ button and select the copy source number,
then press the ENTER button.
"Copy: Copy Destination Selection" will appear at the bottom of the display.
2) Press the remote control ▲/▼ button and select the copy destination number,
then press the ENTER button.
When the signal data has already been registered to the copy destination, the
verification display will appear. Press the remote control ▲/▼ button and
select Yes/No, then press the ENTER button.
This ends the copy procedure.
To turn off the display, press the MENU button. The display will return to the
main menu. A further press of the MENU button will turn off the display.
Signal Entry
Entry Copy
Entry Move
Entry Delete
Change Defalut
Memory edit
Load
Store
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03 CUTOM 0004 S-VIDEO Off
04
05
06 CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09 CUTOM 0010 VIDEO Off
Entry Copy: Select Source
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01 CUTOM 0007 YCbCr1 On
02
Overwrite?
Ye s
No