Filter
Top Products
CHAPTER 1 CUSTOMIZING OFFICE DATA
How to Customize Office Data
NEAX2000 IVS
2
Office Data Programming Manual
ND-70931 (E), Issue 2.0
Page 7
• Type of Telephone
The type of station telephone set is specified as follows:
TYPE OF TEL DESCRIPTION
DP . . . . . . . . . . . . . Dial Pulse Telephone set
PB . . . . . . . . . . . . . DTMF Telephone set
D
term
. . . . . . . . . . . D
term
set
• SERVICE CLASS-A/B/C
Specify the service class (1-15) programmed in the Service Restriction Data Table.
• RESTRICTION CLASS-DAY/NIGHT
Specify the Trunk Restriction Class as follows:
1: Unrestricted
2: Non-Restricted-1
3: Non-Restricted-2
4: Semi-Restricted 1
5: Semi-Restricted 2
6: Restricted 1
7: Restricted 2
8: Fully-Restricted
• DIT TRUNK NUMBER
In the case of the Direct-In Termination (DIT) station, specify the trunk number connected.
Trunk Data
In Trunk Data Table (Table 1-3), the following data is required:
• ACCESS NUMBER
Specify the access code for the trunks.
• DESTINATION
Specify the distant office such as Central Office (Public Exchange), Tie Line, etc.