Filter
Top Products
Connecting the PC as a monitor
DVI (Digital Visual Interface) INPUT
1. Connect the DVI of PC to the DVI input on the TV.
2. Select PC-Digital mode by pressing the TV/AV button repeatedly. (When
DVI source is connected, TV/AV mode converts PC to DVI mode.)
Note:
a. If the set is cold, there may be a small “flicker” when the set is switched on.
This is normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
c. The resolution which is not supported will appear at the resolution which gets near
to the resolution which is supported
* The standard of the resolution which gets near : H/V sync.
d. When resolutions are displayed that are not native to the panel resolution, text may
appear choppy or lines may appear to be bold or thicker than others.
To minimise, choose a resolution similar to the panel
28
PC ANALOG(D-SUB) INPUT
1. Connect the PC ANALOG IN cable (D sub jack) from the monitor output socket
of
the PC to the PC/DTV input socket of the set.
2.
Connect the PC Audio IN cable from the PC to the PC Audio IN of the set.
3.
Press the TV/AV or TV/PC button
to select PC ANALOG IN mode.
4. Switch on the PC, and the
PC screen appears on the set.
The set can be operated as the PC monitor.
Resolution
640 x 480 31.5 KHz 60 Hz
640 x 480 37.9 KHz 72 Hz
640 x 480 37.5 KHz 75 Hz
720 x 400 31.4 KHz 70 Hz
800 x 600 35.1 KHz 56 Hz
800 x 600 37.9 KHz 60 Hz
800 x 600 48.1 KHz 72 Hz
800 x 600 46.9 KHz 75 Hz
1024 x 768 48.4 KHz 60 Hz
1024 x 768 56.5 KHz 70 Hz
1024 x 768 60.0 KHz 75 Hz
1280 x 768 47.4 KHz 60Hz RB
1280 x 768 47.8 KHz 60 Hz
720 x 576p 31.2 KHz 50 Hz
1280 x 720p 37.5 KHz 50 Hz
1920 x 1080i 28.1 KHz 50 Hz
VGA
SVGA
XGA
WXGA
DTV
Mode Resolution
Horizontal
frequency(KHz)
Vertical
frequency(Hz)