Filter
Top Products
12
Setting up TV Programme
Once you have preset the programme, you will be able to
use the PR
xy
or NUMBER buttons to scan the
programme you programmed.
Programme can be tuned using Auto or Manual
programme menu.
Auto Programme
All programme that can be received are stored by this
method. It is recommended that you use Auto programme
during installation of this set.
1. Press the MENU button.
2. Select the Setup menu, then press VOLÏqbutton.
3. Select the Auto programme menu, then press
VOLÏqbutton.
4. Press the PR
xy
button to select System.
5. Select a TV system with the VOLÏq button;
BG : (West Europe/Asia/M.East/Africa/Australia)
I : (UK/Hong Kong/South Africa)
DK : (Russia/China/East Europe)
M : (USA/Korea/philippines)
6. Press the PR
xy
button to select Storage from.
7. Select the beginning programme number with the
PR
xy
button or NUMBER buttons.
8. Select Start, then press VOLÏq button.
Press MENU button to finish auto programme.
9. Press the TV/AV button to finish Auto programme.
10. Press the TV/AV button to return to normal TV
viewing.
ƇƉ ȖȘ 5-6=<>)>
Auto programme
System BG
Storage from 1
Start
13
Setting up TV Programme
Manual Programme
Manual Programme lets you manually tune and arrange
the programme in whatever order you desire. Also you can
assign a programme name with 5 characters to each
programme number.
1. Press the MENU button.
2. Select the Setup menu, then press VOL
Ïq
button.
3. Select Manual programme menu, then press
VOL
Ïq
button.
4. Press the PR
xy
button to select System.
5. Select a TV system with the VOL
Ïq
button.
BG : (West Europe/Asia/M.East/Africa/Australia)
I : (UK/Hong Kong/South Africa)
DK : (Russia/China/East Europe)
M : (USA/Korea/philippines)
6. Press the PR
xy
button to select Channel.
7. Press the VOLÏq button to select V/UHF or Cable
as required. If possible, select the programme
number directly with the number buttons.
8. If the TV picture reception is not good, then do the
fine tuning. Select FINE, then adjust the received
signal with the VOL Ïq button.
9. Press the PR
xy
button to select Search. Press
the VOL Ïq button to commence searching. If a
channel is found the search will stop.
10. Press PR
xy
button to select NAME.
Press VOL Ïq button to allocate the location and
use PR
xy
button to select the character.
(blank, +, -, Alphabet A to Z, Numeric 0 to 9)
11. If this programme is the one required, press the
PR
xy
button to select Storage. Select the
desired programme number with the VOL
Ïqbutton or NUMBER buttons.
12. Press the OK button to store it. The display Stored
will appear.
To store another programme, repeat steps 5 to 10.
ƇƉ ȖȘ 735-6=<>)>
Manual programme
System BG
Channel V/UHF 5
Fine ȘȘȘ
Search ȘȘȘ
Name
Storage 1