NEC PX-61XM4A Flat Panel Television User Manual


 
En-28
Setting the screen size for S1/S2 video input
If the S-video signal contains screen size information, the
image will be automatically adjusted to fit the screen when
this S1/S2 is set to AUTO.
This feature is available only when an S-video signal is
input via the VIDEO3 terminal.
Example: Setting S1/S2 to AUTO
On S1/S2 of OPTION2 menu, select AUTO.
SEL. ADJ. RETURN
OPTION2 2 / 4
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
CLOSECAPTION
CAPTION CONT.
NEXT PAGE
: OFF
: ON
: 3
: AUTO
: ON
: OFF
: LOW
EXIT
Information
S1/S2 settings
AUTO: Adjusts the screen size automatically according
to the S1/S2 video signal.
OFF: Turns the S1/S2 function off.
Setting the picture size for RGB input signals
Use this procedure to switch the setting to ON or OFF.
* This function is available only for 50 and 61 inch types.
Example: Setting the PICTURE SIZE mode to
OFF
On PICTURE SIZE of OPTION2 menu, select OFF.
SEL. ADJ. RETURN
OPTION2 2 / 4
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
CLOSECAPTION
CAPTION CONT.
NEXT PAGE
: OFF
: ON
: 3
: OFF
: OFF
: OFF
: LOW
EXIT
Setting the signal and black level for DVI
signal
Choose the signal for the DVI connector (PC or STB/
DVD) and set the black level.
Example: Setting the PLUG/PLAY mode to STB/
DVD
On OPTION2 menu, select DVI SET UP, then press the
MENU/ENTER button.
The DVI SET UP screen appears.
On PLUG/PLAY of DVI SET UP menu, select STB/
DVD.
SEL. ADJ. RETURN
DVI SET UP
EXIT
PLUG/PLAY
BLACK LEVEL
: STB/DVD
: HIGH
Setting CloseCaption
Choose the closed caption mode that allows text to be
superimposed in the active video.
Example: Setting CLOSECAPTION to CC2
On CLOSECAPTION of OPTION2 menu, select
CC2.
SEL. ADJ. RETURN
OPTION2 2 / 4
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
CLOSECAPTION
CAPTION CONT.
NEXT PAGE
: OFF
: ON
: 3
: OFF
: ON
: CC2
: LOW
EXIT
Information
CLOSECAPTION settings
OFF: This exits the closed caption mode.
CC1~4: Text is superimposed.
TEXT1~4: Text is displayed in full screen.
A closed caption signal may not be decoded in the
following signature;
1. when a video tape has been dubbed.
2. when the signal reception is weak.
3. when the signal reception is nonstandard.
When using closed captioned channel or the text mode,
the text screen always appears.
When there is no signal, however, the text screen will
not display text characters.
Information
PLUG/PLAY settings
PC: When connected to the PC signal.
BLACK LEVEL is set to LOW automatically.
STB/DVD:
When connected to the SET TOP BOX, DVD etc.
BLACK LEVEL is set to HIGH automatically.
BLACK LEVEL settings
LOW: When connected to the PC signal.
HIGH:
When connected to the SET TOP BOX, DVD etc.
Change HIGH into LOW if the black level appears gray.
Setting the contrast of CloseCaption
Choose the brightness of the closed caption.
Example: Setting CAPTION CONT. to NORMAL
On CAPTION CONT. of OPTION2 menu, select
NORMAL.
SEL. ADJ. RETURN
OPTION2 2 / 4
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
CLOSECAPTION
CAPTION CONT.
NEXT PAGE
: OFF
: ON
: 3
: OFF
: ON
: OFF
: NORMAL
EXIT
Information
CAPTION CONT. settings
NORMAL: Closed Caption brightness is set to normal.
LOW: Closed Caption brightness is set to lower.