NEC PX-61XM4A Flat Panel Television User Manual


 
En-35
Switching the input source quickly
This feature enables quick input selection.
After setting ON, press the CLEAR/SEAMLESS SW
button for quick switching between the two selected input
signals.
Example: Set to switch quickly between RGB1 and
RGB2.
On SEAMLESS SW of OPTION4 menu, select ON.
Select RGB1 and RGB2.
SEL. ADJ. RETURN
OPTION4 4 / 4
PREVIOUS PAGE
SUB. PICTURE
ZOOM NAV
PIC FREEZE
SEAMLESS SW
SELECT1
SELECT2
TEXT INSERT
: BTM LFT
: S BY S1
: ON
: RGB1
: RGB2
: OFF
EXIT
* The available sources depend on the setting of input.
Information
SEAMLESS SW Function
* This feature will not function for certain input
combinations. See the table on page En-15.
* After switching to the selected input, please operate this
function.
* This feature will not function during split screen mode.
* When SEAMLESS SW is first turned on, or when
signals being transmitted are changed, there may be a
slight delay due to signal analysis.
SEAMLESS SW settings
OFF: Turns off the SEAMLESS SW function.
ON: When the CLEAR/SEAMLESS SW button is
pressed, input signals will switch quickly according to
the setting of SELECT1 and SELECT2.
RGB/PC1
RGB/PC1
RGB/PC1
RGB/PC1
RGB/PC1
RGB/PC1
Side-by-Side Picture-in-Picture
SELECT/
FREEZE
button
SELECT/
FREEZE
button
S BY S1
RGB/PC1
RGB/PC1
or
S BY S2
RGB/PC1
RGB/PC1
Side-by-Side Picture-in-Picture
POINTER button
or
Zoom+/- button
POINTER button
Displaying still images in the sub screen
This feature enables display in the sub screen of still images
captured by pressing the SELECT/FREEZE button.
Example: Setting PIC FREEZE to BTM LFT
On PIC FREEZE of OPTION4 menu, select BTM
LFT.
SEL. ADJ. RETURN
OPTION4 4 / 4
PREVIOUS PAGE
SUB. PICTURE
ZOOM NAV
PIC FREEZE
SEAMLESS SW
SELECT1
SELECT2
TEXT INSERT
: BTM LFT
: BTM LFT
: OFF
:
:
: OFF
EXIT
Information
PIC FREEZE Function
* This feature does not function during split screen mode.
* Digital zoom is not available while this function is
operating.
* A further press of the SELECT/FREEZE button while
this function is operating will cancel this function.
* Providing a 2-screen display will cancel this function.
PIC FREEZE settings
OFF: Will not show the still image.
S BY S1, 2: The still images captured by pressing the
SELECT/FREEZE button will be shown on the sub
screen of side-by-side mode.
BTM LFT~TOP LFT: The still images captured by
pressing the SELECT/FREEZE button will be shown
on the sub screen of picture-in-picture mode.
BTM LFT~TOP LFT: Will show the entire image on
the sub screen of picture-in-picture mode.