NEC PX-61XM4A Flat Panel Television User Manual


 
En-30
SINGLE, SIDE BY SIDE1~3 and PICTURE
IN PICTURE (BOTTOM LEFT~TOP LEFT).
Use the and buttons to select MAIN/ SUB
and LEFT/RIGHT, then use the
and
buttons
to choose from VIDEO1~3, HD/DVD1~2 and
RGB/PC1~3.
SEL. RETURN
PROGRAM TIMER
EXIT
ZOOM
ADJ.
DATE
MON
TUE
SAT
*FRI
SAT
*
INPUT
MULTI
VIDEO1
HD/DVD1
VIDEO1
RGB1
FUNCTION
INVERSE
WHITE
WHITE
ON
08 : 30
- - : - -
08 : 30
08 : 30
- - : - -
08 : 30
15 : 30
OFF
10 : 30
18 : 15
12 : 15
10 : 00
- - : - -
12 : 15
16 : 00
PICTURE IN PICTURE SIDE BY SIDE
SEL. ADJ. RETURN
PROGRAM TIMER
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM LEFT
INPUT MODE
MAIN
SUB
: RGB/PC1
: VIDEO1
EXIT
MULTI REPEAT
Two repeat timers are available.
Each timer has MULTI MODE, WORK TIME and INPUT
MODE functions.
Example:
TIMER1 is set to display RGB/PC1 (MAIN) and
VIDEO1 (SUB) for 4 hours in picute-in-picture mode.
TIMER2 is set to display RGB/PC3 (LEFT) and HD/
DVD1 (RIGHT) for 2.5 hours in side-by-side mode.
On MULTI REPEAT of TIMER, select ON, then
press the MENU/ENTER button.
The MULTI REPEAT TIMER screen appears.
Adjust the items.
SEL. ADJ. RETURN
EXIT
TIMER
PRESENT TIME
PROGRAM
MULTI REPEAT
: OFF
: OFF
SEL. ADJ. RETURN
MULTI REPEAT TIMER
1 MULTI MODE
WORK TIME
INPUT MODE
MAIN
SUB
2 MULTI MODE
WORK TIME
INPUT MODE
LEFT
RIGHT
: BTM LFT
: 04H00M
: RGB/PC1
: VIDEO1
: S BY S1
: 02H30M
: RGB/PC3
: HD/DVD1
EXIT
Information
MULTI REPEAT settings
MULTI MODE: Set the input mode to be displayed
while the timer is on.
WORK TIME: Set the time duration of the display.
Time range is from 1 minutes to 4 hours and 15 minutes.
INPUT MODE: Set the signal that will be displayed
within the selected screen.
Select MAIN or SUB for PICTURE IN PICTURE
(BTM LFT~TOP LFT) and LEFT or RIGHT for
S BY S1~3. Only one signal is selected for
SINGLE.
* The two repeat timers run consecutively, i.e., Timer1
Timer2Timer1Timer2.
* When both PROGRAM TIMER and MULTI REPEAT
TIMER are set, priority is given to PROGRAM TIMER.
SEL. ADJ. RETURN
PROGRAM TIMER
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
LEFT
RIGHT
: RGB/PC1
: VIDEO1
EXIT
Enabling/disabling the front panel controls
This function enables/disables the front panel controls.
Example: Setting ON
On CONTROL LOCK of OPTION3 menu, select
ON, then press the MENU/ENTER button.
SEL. ADJ. RETURN
OPTION3 3 / 4
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
REMOTE ID
ID NUMBER
VIDEO WALL
NEXT PAGE
: ON
: ON
: OFF
: ALL
: ALL
EXIT
Information
CONTROL LOCK settings
ON: Disables the buttons on the front panel.
OFF: Enables the buttons on the front panel.
* Even when the CONTROL LOCK is set, the POWER
switch will not be locked.
* This becomes effective when the on-screen menu goes
out.
Setting the power on mode
This function sets the input mode and the sound volume
at the time the power is switched on.
Example: Setting the input mode to VIDEO2
On OPTION3 menu, select PWR.ON MODE , then
press the MENU/ENTER button.
The PWR.ON MODE screen appears.
On INPUT of PWR.ON MODE menu, select
VIDEO2.
The available inputs depend on the setting of input.
SEL. ADJ. RETURN
EXIT
PWR. ON MODE
INPUT
VOLUME
: VIDEO2
: LAST
Information
INPUT settings
LAST: Last mode (the input that was last selected at
the time the power was switched off).
VIDEO1, 2, 3: VIDEO input mode.
RGB1, 2, 3: RGB input mode.
HD/DVD1, 2: HD/DVD input mode.
MULTI: Multi screen mode.
Follow the procedure used for PROGRAM TIMER. See
page 29.
PICTURE IN PICTURE SIDE BY SIDE
VOLUME settings
LAST: Last mode (the volume that was last selected at
the time the power was switched off).
0 to 44: The level of sound volume.
SEL. ADJ. RETURN
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
LEFT
RIGHT
: HD/DVD1
: VIDEO1
EXIT
SEL. ADJ. RETURN
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM LEFT
INPUT MODE
MAIN
SUB
: HD/DVD1
: VIDEO1
EXIT