Filter
Top Products
18
Location and Function of Parts
Chapter 1 Overview
E Menu control section
a MENU button
Press this button to display the menu on the monitor screen
and the time counter display. Press it again to exit the menu
display.
On how to use the menu, see Chapter 4 “Menu Settings.”
b RESET (NO) button
Press this button to:
• reset menu settings,
• reset the time data shown in the time counter display to
zero, or
• send a negative response to the prompts issued by the
unit.
c TC (time code) PRESET button
Use this button to set the initial value of the time code
produced by the internal time code generator and user bit
data.
For details on setting an initial time code value and user
bit data, see “To set the initial time code value and user bit
data” on page 46.
d SET (YES) button
Press this button to:
• save new settings, such as selected menu items and time
code settings, to memory, or
• send a positive response to the prompts issued by the
unit.
e fFgG (arrow) buttons
Use these buttons to move around the menu items, and also
to modify the initial time code value and user bit data.
When the SEARCH ENABLE menu item (see page 60) is
set to ENABLE, you can also use these buttons to carry out
the following playback operations.
For details on modifying the time code value, see “To set
the initial time code value and user bit data” on page 46.
MENU RESET(NO)
TC
PRESET
SET(YES)
a MENU button
b RESET (NO) button
c TC PRESET button
d SET (YES) button
e fFgG buttons
Playback type Direction Operation to carry out
Playback in range
±10 times normal
speed
Forward Press the G button.
Reverse Press the g button.
Frame-by-frame
playback
Forward Press the f button.
Reverse Press the F button.
Continuous
playback in jog
mode
Forward Hold down the f button.
Reverse Hold down the F button.