Filter
Top Products
26
Troubleshooting
Troubleshooting
If wireless remote controllers fail to function as expected, check the
list of common problems below before consulting your retailer or
Nikon representative.
The unit does not turn on (no indicators appear in the display):
If the unit is not connected to a camera, confi rm that the batteries are
inserted in the correct orientation (0 4). If the problem persists, replace
the batteries with fresh batteries or with fully charged rechargeable bat-
teries.
If the unit is connected to a camera, confi rm that the cable is correctly
connected and that the camera is on (0 6).
The camera does not respond to the transmitter shutter-release button:
Confi rm that the receiver is on the same channel and in the same group
as the transmitter (0 8, 10).
If PAIRING is selected for LINK MODE, select PAIRING > LIST and confi rm
that the transmitter is listed, indicating that the transmitter and receiver
are paired. If the transmitter is not listed, pair the devices as described
on page 9.
If ID (supported with WR-1 units only) is selected for LINK MODE, con-
fi rm that all units have the same name (0 23).
Confi rm that the receiver is connected to the camera (0 6).
The shutter can not be released. Check the camera.
The unit beeps twice and the camera shutter is not released:
The shutter can not be released. Check the camera.
Check that the receivers do not share the same body number.
NOT DETECTED: No paired or linked units in the selected group can be de-
tected on the selected channel.
NO RESPONSE: Reattempt pairing after placing the units closer together and
confi rming that they are on the same channel (0 8, 9).
#00 IS DUPLICATED: The current unit ID (body number) is shared by other
receivers with the same name. Select a unique unit ID (0 23).
•
•
•
•
•
•
•
•
•