Niles Audio RCA-TT2 Universal Remote User Manual


  Open as PDF
of 28
 
10
INSTALLATION (continued)
STEP 3 – CONNECTING THE SENSOR CABLE TO THE
TABLETOP SENSOR
Pull out the removable connector from the bottom of the tabletop sensor. Insert each wire into the
appropriate hole on the removable connector plug (Figure 3), and snap the locking tab down.
To help you, the connector plug is keyed. Insert the smooth side of the connector plug into the

side of the socket.
Figure 3: Removable Connector Plug
TECH TIP: Wire size is expressed by it’s AWG (American Wire Gauge) number. The lower

 previous next