Nokia 230 T DVR User Manual


 
GB 26
Navi Bars
Viewing images received from an external
device. (Bluetooth connection)
General
230 T is equipped with a built in Bluetooth module that makes it
possible to receive, watch and also save digital images transmit-
ted from an external device. This device must be equipped with
the Bluetooth Standard Version 1.1 and “Object Push Profile”.
No cables are necessary as the transmission is wireless. The dis-
tance between the transmitting device and the 230 T should not
exceed 10 meters to ensure good transmission.
Before the 230 T can start to receive images, some settings have
to be made. Refer to Control folder Connections.
About the Images folder in the Navi Bars
Received images can be saved into a folder named Images.
This folder will automatically be created in the Navi Bars as soon
as you save your first picture. You save a received image by press-
ing select, delete it by pressing back.
You can watch images up to 256 Kbyte size. The Image folder can
contain 36 images of max size 64 Kbyte/image. Please note that
only JPEG images with VGA resolution of max. 640 x 480 pixels
are supported.
Images in the folder will be visible as “Thumbnails”. To start
watching an image, mark it in the Image folder and press select
on the remote control. While watching an image you can select
another by pressing cursor up/down. You also have the possi-
bility to delete the image you are watching by pressing opt, or
all images by pressing txt. If you delete all images, also the Im-
age folder will disappear from the Navi Bars. A new one will be
created the next time you save an image.
You stop watching an image by pressing back.
Control folder Connections
Connectivity
Yes The Bluetooth function is enabled and the receiving of im-
ages is possible.
No The Bluetooth function is disabled and the receiving of im-
ages is not possible.
Selecting Yes also means that the external device during its
searching for a suitable Bluetooth receiver to send images to,
should be able to find the 230 T. If it does not find it, the reason
might be that No is selected.