Filter
Top Products
24
1
Setting Time and Date (Time & Date)
Setting Time and Date
Setting the correct time and date on the recorder
is very important since every file recorded on the
recorder will have the time and date information
as part of the file header. This will simplify the
file management aspects later on.
The hour indicator will flash automatically
when you load batteries before using the
recorder for the first time, or after the
recorder hasn’t been used for a long time.
However, when a Password or Fingerprint
(DS-5000iD only) has been set as the
device lock function (☞ P.46), the recorder
will go to the time and date set screen after
verification (unlocking).
BACK EXIT
Time & Date
1 M 14 D 2008 Y
5: 00 PM
24H
BACK EXIT
Time & Date
01 M 14 D 2008 Y
5 : 45 PM
24H
F1, F2, F3 button
OK/MENU,+, –,
9, 0
button
1
Press the 9 or 0 button to select
the item to set.
Select the item from “hour”, “minute”, “year”,
“month” and “day” with a flashing point.
2
Press the
+
or
–
button to set.
Follow the same steps by pressing the 9 or
0 button to select the next item, and press
the
+ or – button to set.
•You can choose between 12 and 24 hour
display by pressing the F2(24H or 12H)* button
while setting the hour and minute.
Example: 5:45 P.M.
5:45 PM (Initial setting)←→ 17:45