One for All 5 Universal Remote User Manual


 
WWW.ONEFORALL.COM 3
Learning feature
The KAMELEON 5 comes equipped with the unique “learning feature”, which
m
eans that you can copy almost any function (max. ± 50) from your original
(
working) remote control onto your new KAMELEON 5 (See “Learning Feature”
on page 15). This comes in handy, when after having setup your KAMELEON 5
you may find that some functions from your original remote are missing on your
KAMELEON 5 key pad.
Macros (sequence of commands)
Your KAMELEON 5 comes with an easy-to-use Macro feature, allowing you to
send several commands with the press of a single key (for example turning a few
d
evices on or off).
O
nce you programmed a macro on one of these keys, the sequence will be per-
formed in every mode.
C
ode upgrade technology
Your ONE FOR ALL KAMELEON 5 also offers a Code upgrade technology.
This technology gives you the possibility to add codes to the memory. If your
d
evice uses a particular code which is not found in the KAMELEON 5 memory
(
using the “Direct code set up” on page 12 or the “Search Method” on page
13) you may use the ”Code Upgrade Technology” (see page 24). Thanks to this
technology your KAMELEON 5 will never become obsolete.
Note: when inserting the batteries the KAMELEON 5 will be in
“demo-mode (showing several screens). The KAMELEON 5 will go
out of demo-mode automatically as you set it up.
Your KAMELEON 5 requires 2 AA/LR6 alkaline batteries.
1. Unscrew the battery door using a coin.
2. Insert the batteries with the positive end (+) upwards.
3. Replace the battery door back into position.
Low Voltage Indicator
As soon as the batteries run out of power the KAMELEON 5 will indicate this.
The IR indicator will flash 5 times whenever you press a key and you cannot
access programming mode.
Please make sure to replace the batteries with 2 new AA/LR6 alkaline
batteries.
About Your KAMELEON 5
Batteries
Kameleon_5_Euro_10_TALEN:Kameleon_5_nieuw_2006_Euro 12-03-2007 16:22 Pagina 3