One for All URC-2585 Universal Remote User Manual


 
Setting Up Your Device
To set up the Big Easy for your television:
Find your Television code in the
Set-Up Code section (starting on page
19). Codes are listed by brand name. The
most popular code is listed first. Make
sure your Television is switched on.
Press and release your BIG EASY’s TV key,
then press and hold the MAGIC key
until the red light blinks twice (the light
will blink once then twice).
Enter your three-digit TV code using
the number keys. The red light will blink
twice.
Now, aim your BIG EASY at your
Television and press POWER.
If your Television switches off, your BIG
EASY is ready to run your Television.
Write your code in the three boxes on page 18, for quick, easy
reference.
To control your Television, press TV first.
5
Setting Up The BIG EASY
1
2
3
4
ONE FOR ALL
A-Mark
Admiral
Anam
Anam National
AOC
Archer
All & Howell
003
179, 180, 016, 047, 093
180
055, 161
019, 030, 052, 003, 136
003
016
030, 046, 186, 056
000
000, 000, 000, 046
TV
MAGIC
Important notes:
- To set up your Video Recorder or Satellite, follow the same
instructions above, only press the VCR or SAT key during
step 2.
- To set up your Cable Box, follow the instructions above
only press the SAT key during step 2.
- If your Video’s original remote control does not have a
power key, press PLAY instead of POWER when searching
for your code.
- If your Device does not respond, follow steps 1 - 4 with
each code listed for your brand. If none of the codes listed
for your brand operate your Device, then try the search
method described on page 14, even if your brand is not
listed at all.