Filter
Top Products
Quick Set-Up
The instructions below and on the next page
can be used to quickly install your new ONE
FOR ALL.
You can use the Quick Set-Up below with the
codes listed on pages 11-21. If this doesn’t
work, try the Quick Search on the next page.
The Quick Search can also be used even if
your brand is not listed at all.
Press device key:
Press and hold
until the red light blinks
twice. Then release.
Enter
(4-digit code). See pages
11-21. The red light will
blink twice.
Aim remote at your
device and press
(or PLAY).
1.
2.
4.
3.
NOTES:
- Make sure your device is switched on.
- The instructions above are a “Quick”
set-up guide. For further explanation,
please refer to the pages within.
- Make sure you write your Set-Up codes
in the boxes provided inside the
battery compartment for easy future
reference.
or or or
____
2