Filter
Top Products
The Search Method
If your device does not respond to the ONE FOR ALL after you have tried
a
ll the codes listed for your brand, try searching for your code. The Search
M
ethod allows you to find the code for your device by scanning through all
the codes contained in the memory of the ONE FOR ALL. The Search
Method may also work if your brand is not listed at all.
To search for your TV code:
1 Switch your television on (not on standby).
2
Press the TV key on your ONE FOR ALL.
3 Press and hold down MAGIC until the red light blinks
twice. (The red light will blink once and then twice)
4 Press 9 9 1. The red light will blink twice .
5 Next, press POWER.
6 Aim the ONE FOR ALL at your Television. Now press CH+
over and over, until your Television turns off (everytime
y
ou press the CH+ key the ONE FOR ALL will send out a
POWER signal from the next code contained in the
memory). You may have to press this key many times
(up to 150 times) so please be patient. If you skip past a
code, you can go to the previous code(s) by pressing the
CH- key. Remember to keep pointing the ONE FOR ALL at
your Television while pressing this key.
7 As soon as your television turns off, press MAGIC to store
the code.
Once you have Set-Up your ONE FOR ALL, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1 Press TV once.
2 Press and hold MAGIC until the red light blinks twice
(The red light will blink once and then twice).
3 Press 9 9 0. The red light will blink twice.
4 For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the digit is
"0".
5 For the second digit, press 2 and count all the red blinks.
If there are no blinks, the digit is "0".
6 For the third digit, press 3 and count all the red blinks.
If there are no blinks, the digit is "0".
7 For the fourth digit, press 4 and count
all the red blinks. If there are no blinks, the digit is "0".
Now you have your four-digit code.
WWW.ONEFORALL.COM 7
Important notes:
- Most TV’s do not switch on pressing the POWER key. Please try pressing a
“number” key or the “TV-text off” key to switch your TV back on.
705016_4515_S-10:ecoline 1_Rubber Scand 13-03-2007 00:44 Pagina 7