Filter
Top Products
Problem & Solution
P
roblem:
Y
our brand is not listed
in the code section?
The ONE FOR ALL does
not operate your
device ?
The ONE FOR ALL is not
performing commands
properly?
Problems changing
channels?
The ONE FOR ALL does
not respond after
pressing a key?
The red light does not
blink when you press
a key?
S
olution:
T
ry the search method on page 7.
A) Try all the codes listed for
your brand. B) Try the search
method on page 7.
You may be using the wrong
code. Try repeating the Direct
Set-Up using another code listed
under your brand or start the
search method over again to
locate the proper code.
Enter the programme number
exactly as you would on your
original remote.
Make sure you are using new
batteries and are aiming the one
for all at your device.
Replace batteries with 2 fresh,
new “AA” alkaline batteries.
8 WWW.ONEFORALL.COM
Quick Code Reference
W
rite down the code for your device in the boxes below and in the
b
attery compartment for quick and easy reference.
Brand Code
1
._________________________
■
■
■
■
■
■
■
■
705016_4515_S-10:ecoline 1_Rubber Scand 13-03-2007 00:44 Pagina 8