Filter
Top Products
17
5
4
• If you want to copy other functions within the same mode, simply repeat step 4
pressing the next key you want to copy by learning.
• You can learn approximately 100 functions.
How to delete a learned function to obtain the original function?
1) Press and hold magic key for 3 sec. --> The Blue ring will light up twice.
2) Press 97 6.
3) Select the corresponding device mode (e.g. tv).
4) Press the key to be deleted (e.g. red key) twice.
Congratulations! You successfully learned (copied) the “I/II (mono/stereo)”
function from your original remote control onto your ONE FOR ALL remote
control. NOW whenever you press the “red key” (in tv mode) you will obtain
the “I/II (mono/streo)” function.
Press and hold the magic key
to save your settings.
--> The Blue ring will light up twice.
2
- 5 cm
First;
Press the ”red” key.
T
he tv LED will flash rapidly.
ATTENTION: Place both remote controls on a flat surface. Make sure that
the ends you normally point at your device are facing each other.
Align both remotes also in height
then;
Press the “I/II (mono/streo)” key.
The Blue ring will light up twice to
confirm successful learning.
x2
3 sec.
URC-7960_MANUAL-V1-RDN-1071009-1020:URC-7960 07-10-2009 14:52 Pagina 17