One for All URC-8305 Universal Remote User Manual


 
16 WWW.ONEFORALL.COM
- As soon as the display switches off in step 5 you need to press the key (in
this example: the ”mono/stereo” key) on your original remote within
1
5 seconds. If no key is pressed while in learning mode, the remote will
r
eturn to user mode after 30 seconds.
-
During learning, keys such as (TV) menu, (TV) guide etc. will not change
screen when pressed.
-
If you learn a function on a key, the original KAMELEON 5 function
a
utomatically becomes shifted. Press the MAGIC key then the key to access
i
t (this excludes the POWER, Channel and Volume keys). If you learned on a
digit key, access the original function by pressing magic twice and then
t
he digit.
-
If you want to learn a function on a key that is not in the main screen, use
the SCROLL key to change the screen.
- The learning feature is mode specific. Therefore you can place one learned
f
unction per mode on the same key.
- The KAMELEON 5 can learn approximately 50 functions. The amount of keys
depends on the other programmed functions and on the remote to be
learned from.
- You can replace a learned function by placing another learned function on
t
op.
- Please make sure not to use the learning procedure when in direct sunlight
o
r under incandescent lights.
- Make sure you are using new batteries before following the learning
instructions.
- Upon changing the batteries, your learned functions will be retained.
Shifted Learning
It is also possible to place a function shifted on a key to maintain the original
function.
Example: to place the mono/stereo function shifted on the “red” key.
To place the (e.g. mono/stereo) function shifted on the red key, simply follow
steps 1-8 on page 15, only press ”MAGIC” then the ”red” key during step 5.
To access the e.g. ”mono/stereo” function in this example; simply press
MAGIC” and then the ”red” key.
- If a Shifted Learned function is placed on the Channel and Volume keys
then the “Colour & Brightness“ features will be sacrificed.
- If you place a function shifted on a digit key (0 - 9) you need to press
MAGIC twice then the digit key to access this shifted function.
Learning Feature
Kameleon_5_Euro_10_TALEN:Kameleon_5_nieuw_2006_Euro 12-03-2007 16:22 Pagina 16