Filter
Top Products
19
18
Harman/Kardon 0582
JVC 0558
Kenwood 0534
Magnavox 0503
Magnavox CD-R 0626
Mitsubishi 0521
Onkyo 503
Optimus 0525
Panasonic 0490
Philips 0503, 0539
Pioneer 0525, 0571
Proscan 0522
RCA 0522
Samsung 0573
Sony 0533
Technics 0490
Theta Digital 0571
Toshiba 0503
Yamaha 0490, 0545
Zenith 0503, 0591
Set Up Codes for DVD Players
Aiwa 0203
Carver 0064, 0194, 0323
Denon 0059, 0172
Disco Vision 0023
Funai 0203
Harman/Kardon 0194
Hitachi 0023
Magnavox 0194, 0217
Marantz 0064, 0194
Mitsubishi 0059
NAD 0059
Panasonic 0204
Philips 0064, 0194
Pioneer 0059, 0023
Quasar 0204
Realistic 0203
Samsung 0323
Sega 0023
Sony 0193, 0201
Technics 0204
Theta Digital 0194
Yamaha 0217
Set Up Codes for LD Players
To Set Up Your DVD or LD Player:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1 Turn on your DVD or LD Player and
insert a disc.
2 Press and release the DVD key.
3 Press and hold SETUP until the
display screen changes from
[DVD and the TIME] to [TIMED SEQ].
4 Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
5 Press SELECT and the display
screen will change to [DVD].
NOTE: If you are setting up a LD Player, press either MENU + or
MENU –. The display will change to [LDP].
6 Enter the first DVD or LD code listed
for your brand in the “Set Up Codes
for DVD Players” or “Set Up Codes for
LD Players” on the next page, then
press SELECT. Aim the remote con-
trol at the DVD or LD player and
or press POWER or PLAY.Your player
should turn OFF or start to play your
disc. Press the ESC key to return the
display to [DVD and the TIME]. If
your player does not turn OFF or start
to play your disc, enter the next code
in the code list then press SELECT
followed by POWER or PLAY again.
Once the correct code is entered,
press the ESC key to return the dis-
play to [DVD and the TIME].
For a detailed explanation of what function each key
will perform in the DVD mode, please refer to
page 58 in the “Key Index”.
To Set Up Your CD or MD Player:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1 Turn on your CD or MD Player and
insert a disc.
2 Press and release the CD key.
3 Press and hold SETUP until the
display screen changes from
[CD and the TIME] to [TIMED SEQ].
4 Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
5 Press SELECT and the display
screen will change to [CD].
6 Enter the first CD code listed for your
brand in the “Set Up Codes for CD or
MD Players” on the next page, then
press SELECT.