Filter
Top Products
23
22
Optimus 0531, 0670, 0186, 0042,
0177, 0181, 0219, 0738,
0801, 1023, 0042,
0080*, 0181, 0186,
0531, 0670, 0738, 0801
Panasonic 0039, 0309, 0518
Penney 0195
Philips 0189, 0391
Pioneer 0531, 0014, 0150, 0630,
0080, 1023, 0014*,
0080*, 0150, 0531,
0630, 1023
Proscan 0054
Quasar 0039
RCA 0531, 0054, 0346, 0360,
0530
Realistic 0195, 0163, 0181
Sansui 0189, 0193, 0346
Sanyo 0219, 0801
Scott 0163, 0322
Sharp 0186
Sherwood 0491, 0062, 0502
Siemens 0424
Sony 0158, 0168, 0474,
0158**, 0474
Soundesign 0670
Teac 0463, 0163
Technics 0039, 0309, 0208, 0518
Victor 0074
Wards 0158, 0014, 0189, 0080,
0042, 0054
Yamaha 0176, 0186
Yorx 0195
Zenith 0857
ADC 0531
Adcom 0616
Aiwa 0158, 0189, 0121, 0405
Akai 0076, 0224
Bang & Olufsen 0898
Capetronic 0531, 0195
Carver 0189, 0008, 0042, 0360
Casio 0195
Clarinette 0195
Curtis Mathes 0039, 0080
Denon 0004, 0273, 0771
Emerson 0424
Fisher 0042, 0219, 0360, 0801
Garrard 0463, 0424
Harman/Kardon 0110, 0189, 0891
Inkel 0062
JBL 0110
JVC 0074
Kenwood 0027, 0186, 0042, 0077,
0313, 0314
Koss 0424
LXI 0181
Linn 0189
Lloyd’s 0195
MCS 0039, 0346
Magnavox 0531, 0189, 0195, 0128,
0391
Marantz 0039, 0189, 0128
Modulaire 0195
NAD 0320
NEC 0235
Nakamichi 0097, 0347
Onkyo 0135, 0100, 0380
Set Up Codes For Tuner/Receivers
NOTES: *May use Amplifier code 0013 for power and volume.
See below section for amplifier setup and codes.
**May use Miscellaneous Audio code 0159 to operate surround
and tuner presets. See page 24 for misc. audio setup and codes.
To Set Up Your Amplifier:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1 Turn on your Amplifier.
2 Press and release the AMP key.
3 Press and hold SETUP until the
display screen changes from
[AMP and the TIME] to [TIMED SEQ].
4 Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
To Set Up Your Amplifier (cont.):
5 Press SELECT and the display
screen will change to [AMP].
6 Enter the first Amplifier code listed for
your brand in the “Set Up Codes for
Amplifiers” on the page 23, then press
SELECT.
7 Aim the remote control at the
Amplifier and press POWER.Your
Amplifier should turn OFF. Press the
ESC key to return the display to [AMP
and the TIME]. If your Amplifier does
not turn OFF, enter the next code in
the code list then press SELECT
followed by POWER. Once the cor-
rect code is entered, press the ESC
key to return the display to [AMP and
the TIME].
For a detailed explanation of what function each key
will perform in the Amplifier mode, please refer to
page 61 in the “Key Index”.
Aiwa 0406
Bose 0674
Carver 0269
Curtis Mathes 0300
Denon 0160
GE 0078
Harman/Kardon 0892
JVC 0331
Kenwood 0356
Linn 0269
Luxman 0165
Magnavox 0269
Marantz 0269, 0321, 0892
NEC 0264
Nakamichi 0321
Optimus 0395
Panasonic 0308
Parasound 0246
Philips 0269, 0892
Pioneer 0013, 0300
Realistic 0395
Sansui 0321
Shure 0264
Sony 0220, 0689
Soundesign 0078, 0211
Technics 0308, 0521
Victor 0331
Wards 0013, 0078, 0211
Yamaha 0354, 0133, 0143, 0504
Set Up Codes for Amplifiers