Filter
Top Products
21
20
To Set Up Your CD or MD Player (cont.):
7 Aim the remote control at the CD or
MD player and press POWER or
or PLAY.Your player should turn OFF
or start to play your disc. Press the
ESC key to return the display to [CD
and the TIME]. If your player does not
turn OFF or start to play your disc,
enter the next code in the code list
then press SELECT followed by
POWER or PLAY again. Once the
correct code is entered, press the
ESC key to return the display to [CD
and the TIME].
For a detailed explanation of what function each
key will perform in the CD mode, please refer to
page 63 in the “Key Index”.
ADC 0018
Adcom 0155, 0234
Aiwa 0157, 0012, 0124
Akai 0156
Audio Alchemy 0194
Audio-Technica 0170
BSR 0194, 0245
Bang & Olufsen 0212
Burmester 0420
California
Audio Labs 0029
Carrera 0194
Carver 0157, 0179, 0437
Crown 0122
Curtis Mathes 0029
DAK 0245
DBX 0254
DKK 0000
Denon 0003, 0873
Emerson 0305, 0155, 0164, 0469
Fisher 0179, 0088, 0174, 0342
GE 0009
Garrard 0420, 0393, 0245, 0280,
0425
Genexxa 0032, 0305, 0164
GoldStar 0417
Harman/Kardon 0157, 0173, 0426
Hitachi 0032, 0155
JVC 0072, 0655, 0658
Kenwood 0028, 0037, 0190, 0826,
0681
Kodak 0287
Krell 0157
Kyocera 0018
LXI 0305
Linn 0157
Luxman 0093
MCS 0029, 0043
MTC 0420
Magnavox 0157, 0305
Magnavox
CD-R
0626
Marantz 0029, 0157, 0180
McIntosh 0287
Mission 0157
NEC 0043, 0234
NSM 0157
Nakamichi 0147
Nikko 0164, 0170, 0174
Onkyo 0101, 0868
Optimus 000, 0032, 0179, 0305,
0037, 0420, 0145, 0468,
0087, 0175, 0194, 0196,
0280, 0342, 0426, 0437
Panasonic 0029, 0303, 0367, 0752
Parasound 0420, 0194
Philips 0157, 0287, 0626
Pioneer 0032, 0305, 0468, 0244
Proscan 0053
Proton 0157
QED 0157
Quasar 0029
RCA 0179, 0305, 0053, 0009,
0155, 0764
Realistic 0179, 0420, 0155, 0164,
0175, 0180
Rotel 0157, 0420
SAE 0157
STS 0018
Sansui 0157, 0305, 0202
Sanyo 0179, 0087
Scott 0305, 0155, 0164
Sears 0305
Sharp 0037, 0180, 0861
Sherwood 0180, 0196, 0426
Shure 0043
Sony 0000, 0185, 0490, 0604,
0605
Soundesign 0145, 0425
Set Up Codes for CD or MD Players
Sylvania 0157
Tascam 0420
Teac 0420, 0393, 0174, 0180
Technics 0029, 0207, 0303
Vector
Research 0194, 0417
Victor 0072
Wards 0157, 0053
Yamaha 0036, 0170, 0187
Yorx 0461
Set Up Codes for CD or MD Players (cont.)
To Set Up Your Tuner/Receiver:
NOTE: If the four-digit code for your device begins with a “0”, only
the last three numbers of your code will be displayed.
1 Turn on your Tuner/Receiver.
2 Press and release the TUNER key.
3 Press and hold SETUP until the
display screen changes from [TUNER
and the TIME] to [TIMED SEQ].
4 Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
5 Press SELECT and the display
screen will change to [TUNER].
6 Enter the first Tuner code listed for
your brand in the “Set Up Codes for
Tuner/Receivers” on the next page,
then press SELECT. Aim the remote
control at the Tuner/Receiver and
press POWER.Your Tuner/Receiver
should turn OFF. Press the ESC key
to return the display to [TUNER and
the TIME]. If your Tuner/Receiver
does not turn OFF, enter the next
code in the code list then press
SELECT followed by POWER. Once
the correct code is entered, press the
ESC key to return the display to
[TUNER and the TIME].
For a detailed explanation of what function each
key will perform in the Tuner mode, please refer to
page 60 in the “Key Index”.