Onkyo DV-BD606 Blu-ray Player User Manual


 
8
EN
VIDEO OUTPUT
AUDIO OUTPUT
HDMI
R
L
OUT
COMPONENT
COAXIAL OPTICAL
AC INLET
(PCM//BITSTREAM)
ANALOG DIGITAL
YP
R
VIDEO P
B
2
3 45
1
6
DV
-
BD606
BLU-RAY DISC PLAYER
SD CARD
ON
/
STANDBY
3214*596 7 8* 10
FUNCTIONAL OVERVIEW
The unit can also be turned on by pressing these buttons.*
1. STANDBY indicator
This indicator lights up in red in standby mode and
turns off when the power is on.
2.
y
y
ON / STANDBY button
Press to turn the unit on or off.
3. Disc tray
Place a disc when opening the disc tray.
4. A (open / close) button*
Press to open or close the disc tray.
5. Display
Refer to “Front Panel Display” on page 11.
6. k (pause) button
Press to pause playback.
7. C (stop) button
Press to stop playback.
8. B (play) button*
Press to start or resume playback.
9. Infrared sensor window
Receive signals from your remote control so that
you can control the unit from a distance.
10. SD CARD slot
Insert an SD Memory Card, and play back the
contents in it.
1. VIDEO OUTPUT (COMPONENT) jacks
Use to connect a TV with component video inputs
with an RCA component video cable.
2. HDMI OUT jack
Use to connect a TV with an HDMI compatible port
with an HDMI cable.
3. AUDIO OUTPUT (ANALOG L / R) jacks
Use to connect a TV, an AV receiver / amplifier or
other device with an RCA audio cable.
4. AUDIO OUTPUT (DIGITAL COAXIAL / OPTICAL) jacks
Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio coaxial / optical input jack with a digital audio
coaxial / optical cable.
5. AC INLET Terminal
Use to connect the AC outlet with the AC cord.
6. VIDEO OUTPUT (VIDEO) jack
Use to connect a TV, an AV receiver or other device
with an RCA video cable.
Note
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
This unit does not have the RF modulator.
Front Panel
Rear Panel
E5H50UD_DV-BD606_EN_v1.indd 8E5H50UD_DV-BD606_EN_v1.indd 8 2008/08/20 14:02:572008/08/20 14:02:57