41
Initial Settings menu—Continued
Digital Audio Out settings
Setting Option What it means
Digital Out
On Digital audio is output from the digital outputs.
Off No digital audio output.
Dolby Digital Out
Dolby Digital
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital > PCM Dolby Digital audio is converted to PCM audio before being
output.
DTS Out
DTS
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compati-
ble with DTS audio.)
Off No digital audio is output when playing a DTS disc.
96 kHz PCM Out
96kHz > 48kHz 96kHz digital audio is converted to 48kHz for digital output.
96kHz 96kHz digital audio is output as is at 96kHz.
MPEG Out
MPEG > PCM
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG MPEG encoded digital audio is output as is.
Video Out settings
Setting Option What it means
TV Screen
(See also “Screen sizes
and disc formats” on
page 46.)
4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the
screen.
16:9 (Wide) Set if you have a widescreen TV.
Component Out
Interlace Set if your TV is not compatible with progressive scan video.
Progressive
Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). See also “Switching
the video output to interlace using the front panel controls” on
page 19.
Note that progressive scan video is only output from the com-
ponent video jacks.
AV Connector Out
Video Ordinary (composite) video output, compatible with all TVs.
RGB
If your TV is compatible, this setting gives the best picture
quality.
Note that there is no output from the component jacks when
this setting is selected.