Filter
Top Products
21
Basic Playback
This section explains how to load and remove discs.
Notes:
•You can load up to six discs. You don’t have to load all six
discs every time.
• When the disc tray is closed, all of the disc indicators
appear until the DV-CP702 has checked each bay for the
presence of a disc. If a bay is found to have no disc, the
corresponding indicator disappears.
• The disc tray can be opened and closed even while the DV-
CP702 is in Standby mode, so you don’t have to turn it on
to load or remove your discs. (The disc tray may take sev-
eral seconds to open.)
• The DV-CP702 supports 8 cm and 12 cm discs. To avoid
damaging your discs or DV-CP702, always place discs in
the center of the disc bays.
• Only load discs that are supported by the DV-CP702 (see
page 7). Don’t load cartridge-type discs.
•To avoid personal injury, keep your hands away from the
disc tray as it closes.
•Always use the OPEN/CLOSE [ ] button to open and
close the disc tray. Never push the disc tray, and don’t
touch it, or obstruct it while it’s opening or closing. Don’t
press down on the disc tray while it’s open, and don’t load
anything other than supported discs. Doing so may damage
your discs or DV-CP702.
This section explains how to load and remove discs without
stopping playback.
Loading & Removing Discs
1
Press the OPEN/CLOSE [ ]
button.
The disc tray opens and the six disc num-
ber indicators appear on the display. A cir-
cle appears around the number of the disc
bay on the right.
2
Place a disc, label side up, into
each bay.
3
Press the [DISC SKIP] button to
access the other disc bays.
The disc tray turns counterclockwise two
bays at a time.
4
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
See page 22 for information on selecting
and playing discs.
Tip:
If you press the Play [ ] button, the
disc tray will close and playback of the
disc in the right bay will start automati-
cally. If there is no disc in that bay, the
DV-CP702 will check the other bays and
play the first disc it finds.
Tip:
If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close and playback of the selected disc
will start automatically.
DV
-
CP702
ON STANDBY
SEARCH
LAST M
MEMORY
CHAIN MODE
REPEAT
A
-
B
RANDOM
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLESUBTITLE
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC SKIP
DIMMER
RC
-
542DV
STEP/SLOW
CLEAR
OPEN/
CLOSE
PROGRESSIVE
ENTER
+
10
0
123
456
789
PLAY/ENTER
OPEN/
CLOSE
DISC SKIP
DISC1–6
DISC SKIP
DISC
SELECT
DVD VCD
CD
MP3 WMA
JPEG
OPEN/
CLOSE
Remote controller
DISC SKIP
Remote controller
OPEN/
CLOSE
Remote controller
Loading Discs During Playback
1
Press the OPEN/CLOSE [ ] button.
The disc tray opens.
The disc that’s currently playing remains
inside the DV-CP702 and its disc bay is
empty and won’t come to the front. To
remove this disc you must stop playback
before pressing the OPEN/CLOSE [ ]
button.
2
Load or remove discs as required,
and press the [DISC SKIP] button
to access the other disc bays.
The disc numbers appear onscreen. The
number of the disc bay on the right is
highlighted.
3
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
Playback of the current disc continues
uninterrupted until you either stop play-
back or select another disc.
Tip:
If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close, playback of the current disc will
stop, and playback of the newly selected
disc will start automatically.
DVD VCD
CD
MP3 WMA
JPEG
OPEN/
CLOSE
Remote controller
DISC SKIP
Remote controller
OPEN/
CLOSE
Remote controller
✱✽-✰✷✪✣✥ ✱✽✱✰❉❂n❈❆❍ ✷❂❈❆ ✥✤ ✻❑❆■❅❂❖, ✳❆❃❍❑❂❍❖✤✣, ✥✣✣✧ ✤✣:✤✥ ✮M