Onkyo DV-SP300 DVD Player User Manual


 
11
Rear Panel
For operational instructions, see the page indicated in brackets [ ].
1 DIGITAL OUTPUT OPTICAL jack [16]
Use optical cable to connect your DVD Player to an AV
component that features digital input capability. If the
component has a Dolby Digital or DTS decoder, you can enjoy
theater-quality multichannel sound.
2 DIGITAL OUTPUT COAXIAL jack [16]
Use coaxial cable to connect your DVD Player to an AV
component that features digital input capability. If the
component has a Dobly Digital or DTS decoder, you can enjoy
theater-quality multichannel sound.
3 ANALOG OUTPUT jacks [14, 16]
Insert audio cables (left and rights) to these jacks on your DVD
Player and to the corresponding Audio Input jacks (left and
right) on your TV or receiver.
L
R
MODEL NO.
DV-SP300
DVD PLAYER
VIDEO OUTPUT
Y
P
B
P
R
COMPONENT
OPTICAL
COAXIAL
ANALOG
OUTPUT
DIGITAL
OUTPUT
VIDEO
S VIDEO
12 3
4
56
Control Position and Names
4 VIDEO OUTPUT VIDEO jack [14]
Connect a video cable to this jack and to the Video Input jack on
your TV.
5 VIDEO OUTPUT S VIDEO jack [15]
If your TV has a S-Video jack, you can connect an S-Video
cable to your TV and to your DVD Player for improved video
quality. The S-Video cable only carries the video signal;
remember to connect the left and right audio cables.
6 VIDEO OUTPUT COMPONENT (PR/PB/Y) jacks
[15]
If your TV has component inputs, you can connect a component
video cable to your TV and to your DVD Player for ideal video
quality. The component video cable only carries the video
signal; remember to connect the left and right audio cables.
If you connect a TV that is compatible with a Progressive scan
signal, you can enjoy both Interlaced and Progressive scan.
Note
Progressive scan only works with NTSC format discs.