Filter
Top Products
14
L
R
MODEL NO. DV-SP300
DVD PLAYER
VIDEO
OUTPUT
Y
P
B
P
R
COMPONENT
OPTICAL
COAXIAL
ANALOG
OUTPUT
DIGITAL
OUTPUT
VIDEO
S VIDEO
Making Connections
To accommodate a wide range of home entertainment systems, this player features numerous connection types for both audio and video. Please
refer to the instructions on this and the following pages to determine the best possible type of connections for your system.
Incomplete
Inserted completely
Before Connecting
• Refer to the instruction manuals supplied with any and all components that
you plan to connect the DVD Player to.
• Be sure to turn off the power of all components to be connected and unplug
them from the wall outlet before making any connections.
• Connect the DVD Player to the TV or AV component directly. If you connect
the DVD Player to a VCR, TV/VCR combination, or video selector, the
playback picture may be distorted as DVD Video images are copy protected.
• Please note that video connections to a TV or monitor are necessary because
some discs require on-screen menu interaction before they can be played.
• Connect the plugs securely.
Using the supplied audio/video connection
cable
Using the supplied audio/video cable, make audio connections from
the ANALOG OUTPUT L and R jacks to the corresponding audio
input jacks on the TV.
In the same manner, make the video connection from the VIDEO
OUTPUT VIDEO jack to the corresponding video input jack on the
TV.
Note
• Be sure to match the colors of the plugs on the cable with the
corresponding jacks on the DVD Player and the TV: yellow for video, red
for R (right) audio and white for L (left) audio.
Signal flow
To audio inputs
Video
Audio/video cable (supplied)
Connect the power
cord after all
connections are
complete.
To video input
Connections to a TV
The diagram below shows how to make connections to a TV with built-in stereo speakers using the supplied audio/video cable. After making the
connections on this page, you will be able to start using the DVD Player.
Be sure to set TV Aspect after connection using the setup menu explained in “Customizing the Settings” starting on
page 30.
Analog signal
Audio (L)
Audio (R)
Audio (L)
Audio (R)