Filter
Top Products
23
1. Press
MENU
to display the main menu
screen.
2. Repeatedly press
SEL
or
SEL
to
select
VCR
, then press
SET
.
3. Repeatedly press
SEL
or
SEL
to
select
BEEPER
, then press
SET
to select
ON
or
OFF
.
4. Press
MENU
twice to exit.
USING THE TIMER FEATURES
Setting/Cancelling the On Timer
Follow these steps to set the TV/VCR to turn on
at a specified time.
1. Press
ON TIMER
on the remote control. The
ON TIMER
screen appears.
2. Repeatedly press (or press and hold)
SEL
or
SEL
to select the hour when you
want the TV/VCR to start playing, then
press
SET
.
Note:
Your TV/VCR uses a 12-hour clock.
Be sure
AM
or
PM
appears correctly.
3. Repeatedly press (or press and hold)
SEL
or
SEL
to select the minute when you
want the TV/VCR to start playing, then
press
SET
.
4. Repeatedly press (or press and hold)
SEL
or
SEL
to select the channel number
you want the TV/VCR to tune to when it
turns itself on, or select
PLAY
if you want
the TV/VCR to play a tape when it turns
itself on.
Notes:
• If you want to play a tape when the TV/
VCR turns itself on, be sure to insert a
cassette tape.
• If an entry is not correct, repeatedly
press
SET
to move forward or
CLEAR
to
move backward to the incorrect entry
then correct it.
5. Press
ON TIMER
. The following screen
appears for about 5 seconds, and the ON
TIMER indicator lights on the front panel.
The TV/VCR turns itself on at the time you
selected.
To cancel the on timer, press
ON TIMER
to
display
ON TIMER SET
CANCEL: PUSH
CLEAR KEY
on the TV screen, then press
CLEAR
within about 5 seconds.
ON TIMER
END
appears on the screen.
Note:
After the TV/VCR has been on for 60
minutes, it turns itself off again unless you
press any button on the remote control or
front panel.
16-421.fm Page 23 Tuesday, July 20, 1999 12:01 PM