Filter
Top Products
31
3. Repeatedly press
SEL
or
SEL
to highlight
INPUT SELECT,
press
SET
to select
LINE,
then press
MENU
twice. The menu disappears and
LINE
appears on the TV screen.
Or, repeatedly press
CH
or
CH
to set the TV/VCR to one channel higher than the highest
channel (or one channel lower than the lowest channel number).
LINE
appears on the TV
screen.
4. Repeatedly press
SPEED
on the remote control until the desired recording speed (
SP
,
LP
, or
SLP
) appears.
5. Press
REC/TIME
on the remote control, or
PLAY/REPEAT
and
RECORD
at the same time on the
front panel, to begin recording.
6. Start the dubbing source.
Note:
You can edit out unwanted parts of the original recording by using
PAUSE
on the remote
control while dubbing is in progress.
7. Press
STOP
to stop recording before it automatically stops at the end of the tape. Then stop the
dubbing source.
16-421.fm Page 31 Tuesday, July 20, 1999 12:01 PM