24
Using the Sleep Timer
The TV/VCR’s sleep timer lets you set the TV/
VCR so it plays for a specific amount of time
then automatically turns off.
Follow these steps to set the sleep timer.
1. Press
SLEEP
on the remote control.
SLEEP TIMER 30
appears on the TV
screen.
2. Within 5 seconds, repeatedly press
SLEEP
until the TV screen shows the desired sleep
time period. You can set the time in 30-
minute increments, up to 90 minutes.
Note:
If you do not press
SLEEP
again
within 5 seconds,
SLEEP
and the displayed
time period disappear.
To see the remaining time on the sleep timer,
press
SLEEP
.
SLEEP TIMER
and the remain-
ing time appear on the screen.
Note:
The TV/VCR automatically displays
SLEEP TIMER 3
when there are 3 minutes
left.
To cancel the sleep timer, repeatedly press
SLEEP
until
SLEEP TIMER 00
appears on the
TV screen.
CLOSED CAPTION SYSTEM
Your TV/VCR has several closed caption op-
tions. Check your TV program listings for CC
(Closed Caption) broadcasts.
Selecting the Closed Caption Mode
Most broadcasters send closed captioning infor-
mation by using one of two captioning methods;
C1 and C2. You can select option C1 or C2 for
each active caption mode. You can select any of
the following caption modes.
CAP C1 or C2
—
A narration of the TV program
is displayed on the TV screen.
TEXT C1 or C2
—
The center of the screen is
blocked out. When the TV station broadcasts
text, such as program listings, special informa-
tion, etc., it appears in this space.
OFF
—
Narration does not appear on the screen
even if a closed caption or text broadcast is re-
ceived.
Notes:
• The closed caption or text signal might be
broadcast over C1, C2, or both.
• Text contents can vary, so you might want
to try different settings.
Repeatedly press
C.C.
(closed caption) on the
remote control until the desired caption mode
appears on the screen.
Using the Caption On Mute Feature
You can set the TV/VCR so it automatically dis-
plays closed caption information when you mute
the sound.
Note:
To use this feature, you must have select-
ed
CAPTION OFF
using
C.C.
1. Press
MENU
to display the main menu.
2. Repeatedly press
SEL
or
SEL
to high-
light
TV
, then press
SET
. The
SET UP TV
screen appears with the currently selected
caption setting.
3. Repeatedly press
SEL
or
SEL
to high-
light
CAPTION ON MUTE.
16-421.fm Page 24 Tuesday, July 20, 1999 12:01 PM