Filter
Top Products
41
Cannot see broadcast TV
programs using the VCR’s
tuner.
TV/VCR
is not set correctly. Repeatedly press
TV/VCR
until VCR
appears.
Audio/video connections are incorrect. Check all connections.
Cannot record from the input
jacks.
Connections are incorrect. Check all connections.
INPUT
is not set correctly. Select
LINE
1
or
LINE
2
.
No stereo sound for a stereo
recording.
You have not connected the VCR’s
R-AUDIO-L
OUT
jacks to a ste-
reo system or stereo TV. Connect the jacks to a stereo output.
The audio out setting is not correctly set. Set it to
Hi-Fi
(see “Re-
ceiving/Recording Stereo/SAP Broadcasts” on Page 34).
The VCR might not have adjusted tracking correctly. You might
need to manually adjust tracking (see “Tracking” on Page 31).
PROBLEM POSSIBLE SOLUTION
16-634.fm Page 41 Tuesday, July 20, 1999 5:37 PM