Filter
Top Products
User’s Manual
26
4.2 Sequence Setup
This section introduce you how to view in sequence mode Main Monitor and
Call Monitor, if connected. Sequence function can avoid manually
backtracking and give more flexibility while surveillance.
Select certain view format and press SEQ to toggle the automatic sequential
sequence, press ESC to stop sequencing.
4.3 Searching Recorded Video
The MPEG-4 DVR is capable of searching and playing back recorded video
by date and time or events. Entering the specific date and time of the wanted
video, the unit will then search for the matched video and play it on the
monitor. Alternatively, user can search event video by selecting channel as
well.
In live or playback mode, press SEARCH to enter the Search menu, which is
shown as follows.
Search
----------Search By Time----------
From:
End:
Start Time:
2005/01/01 00:00:00
2005/05/01 00:00:00
2005/01/01 00:00:00
Begin Playback
----------Search By Event----------
Select Channel: CH1 CH2 CH3 CH4
Event List
4.3.1 Searching by Time
Follow the steps to search video by date and time.
• Press SEARCH key to enter the Search menu; the From Time and End
Time of the available video is listed on top of the screen. The value is
unchangeable.
• Use Direction keys to move the cursor for setting the Start Time; adjusting
the date and time values by UP / DOWN keys.
• Press ENTER to confirm the settings or ESC to abort.
• Move the cursor to <Begin Playback> and press ENTER to start playing
back the selected video.
• Either press PLAY/STOP again to return to live video.