Sylvania 6620 LDF TV VCR Combo User Manual


 
22
EN
Shaded buttons are used for following operation.
There are three ways to begin playback on an Audio
CD and MP3 at a specific track.
Using the number buttons
1 Press the Number buttons to enter the
desired track number.
Playback will start at the selected track.
To select single-digit track number, press single
number. (e.g. Press [3] for track number 3.)
To select track numbers which are higher than 9,
press
[+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for track number
25.)
Using [SEARCH MODE]
1 Press [SEARCH MODE].
The track search display appears.
2 Within 30 seconds, select the desired track
number using the Number buttons.
To select single-digit track number, press [0]
first if the total number of track in the disc is 10
or more. (e.g. Press [0] [3] for track number 3.)
Playback will start at the selected track.
Using [SKIP
H
/
G
]
During playback, press [SKIP G] to move the next
track. Press it repeatedly to skip subsequent tracks.
Press [SKIP H] to go back to beginning of the cur-
rent track. Press it repeatedly to go to the previous
tracks.
If [SKIP H / G] is pressed while the play-
back is paused, the playback will be paused
again after skipping to the next track.
[SKIP H / G] are not operative when
playback is stopped.
1 Press [SEARCH MODE] once for the Chapter
search, twice for the Title search during play-
back.
2 Within 30 seconds, enter the desired chapter/
title number using the Number buttons.
Playback will start at the selected chapter or
title.
Press [CLEAR] to erase the incorrect input.
To select single-digit chapter/title number, press
[0] first if the total number of chapter/title in the
disc 10 or more. (e.g. Press
[0] [2] for
chapter/title 2.)
TRACK SEARCH
TITLE / CHAPTER SEARCH
_/2
SEARCH FUNCTION
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
DISPLAY
SKIP
CH.
VOL.
MUTEZOOM
SLEEP
123
456
789
0 +10
+100
123
456
789
0 +10
+100
SEARCH MODE
123
456
789
0
once
SEARCH MODE
123
456
789
0
NOTE