Filter
Top Products
- 18 - EN
5 Select the year
Press [K / L] until your desired
year appears.
(Example: “2005”)
Then press
[B].
6 Select the hour
Press [K / L] until your desired
hour appears.
(Example: “5”, “PM”)
Then press
[B].
7 Select the minute
Press [K / L] until the
desired minute appears.
(Example: “40”)
8 Start the clock
Press [SETUP].
Although seconds are not displayed,
they begin counting from 00 when
you press
[SETUP]. Use this fea-
ture to synchronize the clock with
the correct time.
NOTE:
•
When unplugging the AC cord or if there is a
power failure for more than 3 seconds, you may
have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps
1 to 2.
2)Select the item you want to change using
[B] .
3)Enter correct numbers using
[K / L].
4)Press
[SETUP] to start the clock.
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 FRI 2 0 0 5
HOUR MINUTE
0 5 : – – PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 FRI 2 0 0 5
HOUR MINUTE
0 5 : 4 0 PM
5:40 PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 FRI 2 0 0 5
HOUR MINUTE
– – : – – – –
The unit clock must be set correctly so that VCR
timer recording is possible. It is suggested that the
clock be set manually when first setting up the unit,
then set to [ON] the auto clock setting which will
periodically correct the setting if necessary.
NOTE:
•
If you cannot receive a station with time signals,
auto clock setting cannot be performed. Use manu-
al setting only.
MANUAL CLOCK SETTING
Make sure ...
•
The unit must be turned on.
In the example below, the clock is to be set to:
DATE May 6th, 2005
SETTING TIME 5:40PM
1 Select “SETTING CLOCK”
Press [SETUP].
Press
[K / L] to point to
“SETTING CLOCK”, then press
[ENTER].
2 Select “MANUAL CLOCK SET”
Press [K / L] to point to
“MANUAL CLOCK SET”, then
press [ENTER].
•
If there is no local PBS station in your area or on
your cable system, select “AUTO CLOCK” and
press [ENTER] to turn [OFF] this function before
this step.
3 Select the month
Press [K / L] until your desired
month appears.
(Example: May
→ “05”)
Then press
[B]. (Or press [s] to
go back one step.)
4 Select the day
Press [K / L] until your desired
day appears.
(Example: 6th
→ “06”)
Then press
[B].
CLOCK SET UP
(AUTO / MANUAL)
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / – – – – – – – – –
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 – – – – – – –
HOUR MINUTE
– – : – – – –
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
B MANUAL CLOCK SET
D.S.T. [OFF]
TV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH